Ultra Clear Epoxy

Same-day dispatch
30-day returns
Expert phone support
Australian-owned

Ultra Clear Epoxy

4.9 · 129+ Google reviews
$79.00

  • Crystal-clear 100% solids epoxy topcoat
  • Enhances and protects decorative surfaces
  • High-gloss finish with chemical resistance
  • Ideal as a durable clear protective layer

Size 0.75 Ltr
In stock · ships today
or 4×$19.75 with

Australia-wide delivery in 3–5 business days

Same-day dispatch
30-day returns
Expert phone support
Australian-owned
Not sure which colour? Talk to a real installer · (08) 9434 3302
Description

Ultra Clear Epoxy (UC100) is an industrial grade, two component clear epoxy floor coating developed for Australian conditions. This 100 percent solids, solvent free and odourless concrete floor coating cures to a tough, high gloss film that protects against stains, spills, abrasion and weathering, giving concrete a durable wet look finish.

  • Two part (A and B) 100 percent solids epoxy, solvent free and low odour
  • Excellent chemical, abrasion and weathering resistance for long lasting protection
  • High gloss, chalk resistant clear topcoat that highlights the surface below
  • Can be tinted to Australian Standard colours for a custom finish
  • Compatible with non slip aggregates and decorative flake systems
  • Strong adhesion to most substrates, applied by roller as a thin film

Ideal as a clear topcoat or sealer over driveways, pathways, garages, workshops and warehouse floors. Use it to seal decorative flake and metallic systems, or add aggregate for a non slip finish. The film thickness can be reduced by adding diluent for easier application.

Available in a range of sizes from 0.75 litre up to 30 litre to suit small projects and full commercial floors. Choose your size above, and contact our Australian team if you need help selecting the right epoxy for your job.

Downloads & Guides
Technical data sheet (TDS) Installation guide Product brochure
Common questions

Frequently asked questions

The questions we get asked most about the Ultra Clear Epoxy.

What is Ultra Clear Epoxy used for?
It is a crystal clear, two part epoxy resin for general purpose clear coating and casting on timber, art, benchtops and floors. It cures hard and glossy and stays clear, so the surface or material underneath shows through.
What sizes does it come in?
Ultra Clear Epoxy is sold as a matched resin and hardener set in 0.75 Ltr, 1.5 Ltr, 3 Ltr, 6 Ltr, 15 Ltr and 30 Ltr. Choose the volume that suits your project on this page before adding to cart.
How is it applied?
Mix the resin and hardener at the ratio on the data sheet, stirring thoroughly. Pour or roll it on in thin even coats and pop any air bubbles with a heat gun or torch. Recoat within the stated window for a strong bond between coats.
How long does it take to cure?
It is touch dry in a few hours and ready to recoat the next day. Allow about 24 hours before light foot traffic and around 7 days for full chemical and wear cure. Warmer weather speeds this up and cold weather slows it down.
Will it yellow over time?
It is a clear epoxy with good clarity, but like all epoxies it is not UV stable on its own and can amber under strong direct sun over time. For surfaces in constant sunlight, finish with a UV stable polyaspartic or polyurethane topcoat.
Is this a complete kit?
This is the clear epoxy resin and hardener on its own, not a floor or project kit. Add any flakes, pigments, fillers or tools you need separately, or browse our DIY Complete Kits for ready matched systems.

Still unsure? Talk to a real installer — not a call centre.

Call (08) 9434 3302