AquaSeal Clear Sealer

No flaking, no peeling No flaking, no peeling
Easy to apply Easy to apply
Money-back guarantee Money-back guarantee
20k+ projects protected 20k+ projects protected
4.9 · 129+ Google reviews

AquaSeal Clear Sealer

4.9 · 129+ Google reviews
$139.00

  • Water-based penetrating concrete sealer
  • Natural low-sheen finish
  • Fast drying and solvent free
  • Suitable for indoor and outdoor surfaces

Size 5 Ltr
No flaking, no peeling No flaking, no peeling
Easy to apply Easy to apply
Money-back guarantee Money-back guarantee
20k+ projects protected 20k+ projects protected
Description

SHIMICOAT AquaSeal Clear Sealer is a water based, acrylic concrete floor coating and sealer that penetrates the surface to leave a natural, clear low sheen finish. Solvent free, single pack and easy to apply, it dries fast and cures to a hard wearing, durable seal for interior and exterior concrete and cementitious surfaces across Australia.

  • Water based and solvent free, with low odour and a fast drying time
  • Penetrates and adheres to leave a clear, natural low sheen finish that keeps the look of the original surface
  • Single pack: no mixing, ready to roll or spray straight from the tin
  • Hard wearing and durable for everyday foot and vehicle traffic
  • Suitable for both interior and exterior use, indoors and out
  • Helps protect against dust, staining and general wear

AquaSeal suits a wide range of surfaces, including exposed aggregate, limestone, grey and decorative concrete, polished concrete, tiles, pavers and timber. It is a popular choice for garage floors, driveways, patios and outdoor flooring where a clear, easy to maintain seal is needed.

Available in 5 litre and 20 litre sizes to suit small projects through to larger areas. Choose the size that fits your floor and seal your concrete with confidence.

Downloads & Guides
Technical data sheet (TDS) Installation guide Product brochure Safety Data Sheet (SDS): request by email
Common questions

Frequently asked questions

The questions we get asked most about the AquaSeal Clear Sealer.

What is AquaSeal Clear Sealer used for?
It is a clear, water based concrete sealer that protects and finishes concrete, pavers and masonry. It guards against dust, water, stains and wear, and lifts the look of the surface.
What sizes can I choose?
AquaSeal Clear Sealer comes in 5 Ltr and 20 Ltr. Select your size on this page before adding to cart.
How is it applied?
The surface must be clean, dry and free of dust and grease. Apply thin even coats by roller, brush or sprayer, usually two coats, allowing the recoat time on the data sheet between them. Thin coats give a better finish than one heavy coat.
How much will I need?
Coverage depends on how porous and textured the surface is. As a guide allow around 8 to 10 m² per litre per coat on smooth sealed concrete, and more on rough or bare surfaces. Measure your area and check the data sheet before ordering.
How long before I can use the area?
It is generally touch dry within a couple of hours and ready for light foot traffic the next day. Allow the full cure time on the data sheet before heavy traffic or wetting the surface.
Where can I use it?
It suits driveways, paths, patios, garage floors and other concrete and masonry surfaces. If you are sealing a specific surface and want to confirm it is suitable, contact us before you buy.

Still unsure? Talk to a real installer — not a call centre.

Call (08) 9434 3302