No flaking, no peeling
Easy to apply
Money-back guarantee
20k+ projects protected
SHIMISPART Topcoat UV Shield
- Non-yellowing, UV stable aliphatic polyaspartic topcoat with long term gloss retention.
- Formulated for surfaces in full sun: outdoor concrete, pool surrounds, patios and paving.
- Harder wearing than epoxy, urethane and acrylic topcoats, suitable for water immersion.
- Simple 1.5:1 mix ratio, applied clear or tinted by roller, brush or squeegee.
Description
SHIMISPART™ Topcoat UV Shield is a two component, solvent free, aliphatic polyaspartic topcoat formulated as a decorative finish and durable protective coating for floors and other surfaces. A UV stabiliser package gives long term gloss retention and resistance to yellowing, making it suitable for surfaces in full sun, without the colour shift seen with epoxy and aromatic polyurethane topcoats.
The resin is an aliphatic ester with high resistance to solvents, acids and alkalis, and offers excellent hardness, adhesion, mechanical strength and durability across a wider application temperature range than epoxy. Unlike conventional polyurea, it has enough working time to be applied by brush and roller.
Typical Uses
- UV stable clear finish coat over flake, quartz and metallic floor systems
- Protective topcoat for outdoor concrete, paving, patios and pool surrounds
- Clear sealer for tiles, timber, polished concrete and exposed aggregate
- Protective coating for steel, galvanised steel and aluminium
- Anti-graffiti and easy clean coating for walls and trafficked surfaces
Kit Sizes
- Mini 1.25 Lt: 0.75 Lt Part A resin + 0.5 Lt Part B hardener
- Small 2.5 Lt: 1.5 Lt Part A resin + 1 Lt Part B hardener
- Medium 5 Lt: 3 Lt Part A resin + 2 Lt Part B hardener
- Large 7.5 Lt: 4.5 Lt Part A resin + 3 Lt Part B hardener
- XL 12.5 Lt: 7.5 Lt Part A resin + 5 Lt Part B hardener
- XXL 25 Lt: 15 Lt Part A resin + 10 Lt Part B hardener
Key Features
- Non-yellowing: aliphatic chemistry with a UV stabiliser package for high UV stability
- Suitable for full sun: formulated for outdoor surfaces under direct sunlight
- 100% solids: solvent free with nil VOC, no dilution required
- Superior abrasion resistance: harder wearing than epoxy, urethane and acrylic topcoats
- Water and chemical resistance: suitable for water immersion, resists oils, alkalis and most household chemicals
- Wide cure window: cures at surface temperatures from about 1°C
- Tintable: available clear or tinted to Australian Standard colours
Coverage is approximately 0.2 Lt per square metre per coat, around 5 square metres per litre; apply two coats for full UV protection and gloss. Full application detail is in the Technical Data Sheet under Downloads & Guides below.