Laminating Clear Polyaspartic

Same-day dispatch
30-day returns
Expert phone support
Australian-owned

Laminating Clear Polyaspartic

4.9 · 129+ Google reviews
$89.00

  • Clear polyaspartic for laminating and protection
  • UV-stable and non-yellowing performance
  • Excellent adhesion and waterproofing properties
  • Suitable for indoor and outdoor applications

Size 1Lt
In stock · ships today
or 4×$22.25 with

Australia-wide delivery in 3–5 business days

Same-day dispatch
30-day returns
Expert phone support
Australian-owned
Not sure which colour? Talk to a real installer · (08) 9434 3302
Description

SHIMICOAT Laminating Clear Polyaspartic is a rapid curing, two part, solvent free aliphatic polyaspartic coating and sealer for concrete floors and other surfaces. Engineered as a tough, decorative clear finish, it stays UV stable and non yellowing, making it one of the most hardwearing concrete floor coatings available in Australia for both indoor and outdoor use.

  • Fast curing: typically ready in around 4 hours for a quick return to service.
  • Non yellowing and fully UV stable, ideal for surfaces under direct sun.
  • Superior abrasion resistance compared with epoxy, urethane and acrylic.
  • Excellent chemical, water and corrosion resistance, including water immersion.
  • High solids (around 98 percent), solvent free with very low VOC content.
  • Simple 1:1 mix ratio that can be rolled, brushed or applied by squeegee.

It bonds well to concrete, tiles, epoxy flake coatings, wood and metal, and cures reliably at low temperatures (above 1 degree C). Common uses include garage and workshop floors, flake and quartz flooring topcoats, patios, decorative concrete, and waterproofing repairs indoors and out. It is classed as a non dangerous good for transport.

Available in sizes from 1 litre up to 40 litres to suit small touch ups through to large commercial floors. Choose the volume that matches your project and add it to your cart today.

Downloads & Guides
Technical data sheet (TDS) Installation guide Product brochure
Common questions

Frequently asked questions

The questions we get asked most about the Laminating Clear Polyaspartic.

What is Laminating Clear Polyaspartic used for?
It is a UV stable, crystal clear polyaspartic for thin laminating and clear coating layers that need UV stability. It adds a tough, glossy clear finish that protects the surface without changing its look, and it will not yellow in sunlight.
What sizes does it come in?
Laminating Clear Polyaspartic is supplied as a matched two part set in 1Lt, 2 Lt, 4 Lt, 6 Lt, 8 Lt, 10 Lt, 20 Lt and 40 Lt. Choose the volume that suits your area or project before adding to cart.
How is it applied?
Mix Part A and Part B at the ratio on the data sheet, then roll on in thin even coats. Polyaspartic cures quickly, so work in sections and keep a wet edge. The surface beneath must be clean, dry and sound for a good bond.
Why choose clear polyaspartic over clear epoxy?
Unlike clear epoxy, polyaspartic is UV stable and will not amber under sunlight, so it is the better choice for outdoor surfaces and floors that get direct light. It also recoats and cures faster, which shortens the job.
How long does it take to cure?
It is touch dry within a couple of hours and you can usually recoat the same day. Light foot traffic is fine after about 24 hours and it reaches full chemical and wear resistance within a few days. Exact times depend on temperature, so check the data sheet.
Is this a complete kit?
This is the clear polyaspartic on its own, not a project kit. Add any grit, flakes or tools separately, or see our DIY Complete Kits for ready matched systems with everything included.

Still unsure? Talk to a real installer — not a call centre.

Call (08) 9434 3302