Industrial Tinted Epoxy

Same-day dispatch
30-day returns
Expert phone support
Australian-owned

Industrial Tinted Epoxy

4.9 · 129+ Google reviews
$119.00

  • Heavy-duty epoxy coating for industrial floors
  • Self-levelling formula with scratch resistance
  • Excellent chemical and wear protection
  • Designed for demanding environments

Size 3 Ltr
Colour Bright Blue B23
In stock · ships today
or 4×$29.75 with

Australia-wide delivery in 3–5 business days

Same-day dispatch
30-day returns
Expert phone support
Australian-owned
Not sure which colour? Talk to a real installer · (08) 9434 3302
Description

Industrial Tinted Epoxy is a heavy-duty, two-component (A and B) 100% solid epoxy floor coating engineered for high-performance concrete floors. This solvent-free, low-odour concrete floor coating is self-levelling with strong scratch, chemical and abrasion resistance, and it has been developed specifically for Australian conditions to deliver a tough, high-gloss, wet-look finish that protects against stains, spills and everyday wear.

  • Two-component 100% solid epoxy: use as a basecoat, primer or tinted finish coat
  • Self-levelling formula with excellent adhesion to most concrete substrates
  • Strong chemical, abrasion and scratch resistance for long-lasting durability
  • Solvent-free and low odour, with a high-gloss, wet-look surface
  • Chalk and weather resistant, suited to demanding Australian environments
  • Add aggregates while wet to create a non-slip floor finish

Ideal for driveways, pathways, workshops, warehouses and other concrete surfaces that need a durable, hygienic and easy-to-clean sealer. It can be applied as a thin film by roller, and the coating thickness can be reduced by adding diluent for primer coats.

Available in a range of sizes (3, 6, 15 and 30 litre) and Australian Standard colours including white, neutral grey, dark grey, black, bright blue, terracotta, dark brown and cream. Choose your size and colour above to order the right Industrial Tinted Epoxy for your project.

Downloads & Guides
Technical data sheet (TDS) Installation guide Product brochure
Common questions

Frequently asked questions

The questions we get asked most about the Industrial Tinted Epoxy.

What is Industrial Tinted Epoxy used for?
It is a two part, solid colour epoxy coating for concrete floors and surfaces. It seals and colours the concrete in one hard wearing finish and suits garages, workshops, sheds and commercial floors that take traffic and wear.
What sizes and colours can I choose?
Industrial Tinted Epoxy is sold by volume in 3 Ltr, 6 Ltr, 15 Ltr and 30 Ltr. You can pick from 8 tinted colours. Choose your size and colour on this page before you add to cart, and the product is supplied as a matched two part epoxy.
How is it applied?
Prepare the concrete so it is clean, dry and sound, then mix the two parts (resin and hardener) at the ratio on the data sheet. Roll it on in even coats, usually two, working in manageable sections. Bare concrete should be primed or etched first for the best bond.
How much will I need?
Coverage depends on how porous your surface is and how many coats you apply. As a rough guide allow around 4 to 5 m² per litre per coat on prepared concrete. Rough or bare concrete draws in more, so measure your area and check the data sheet before ordering.
How long does it take to cure?
It is touch dry in a few hours and ready to recoat the next day. Allow about 24 hours before light foot traffic and around 7 days for full chemical and wear cure. Warmer weather speeds this up and cold weather slows it down.
Is this a full floor kit or just the coating?
This is the tinted epoxy coating on its own, not a complete floor kit. If you want everything for a finished floor in one box, including prep, colour and a clear topcoat, take a look at our DIY Complete Kits instead.

Still unsure? Talk to a real installer — not a call centre.

Call (08) 9434 3302