Same-day dispatch
30-day returns
Expert phone support
Australian-owned
Decorative Media
Hybrid Stone Flake
$149.00
- Premium natural stone look decorative flake
- Granite, quartzite, travertine and slate blends
- For epoxy and polyaspartic floor coatings
- Fourteen stone colours, supplied in 5kg bags
Description
SHIMICOAT Hybrid Stone Flake is a premium decorative flake that recreates the look of natural stone on epoxy and polyaspartic floors across Australia. The Hybrid Stone range blends rich, multi tone flakes inspired by granite, quartzite, travertine and slate for a high end, natural stone finish.
- Premium stone look blends for a natural, high end floor finish
- Compatible with epoxy, polyurethane, polyaspartic and acrylate systems
- Hard wearing and suited to high traffic residential and commercial floors
- Adds grip, depth and the appearance of natural stone
- Fourteen stone blends including Blue Granite, Quartzite, Travertine, Slate and Limestone
Ideal for showrooms, retail spaces, living areas, entryways and feature floors where a natural stone look is the goal. Broadcast into a wet base coat, then seal for a durable, stone effect surface.
Supplied in a 5kg bag and available in fourteen Hybrid Stone colours. Choose your colour above to order.
Downloads & Guides
Frequently asked questions
The questions we get asked most about the Hybrid Stone Flake.
What is Hybrid Stone Flake?
It is decorative vinyl flake used to create natural stone look flake floor finishes. The flakes are broadcast into a wet base coat and sealed under a clear topcoat to give a textured, stone like look on garage, shed, patio and interior floors.
What colours can I choose?
Hybrid Stone Flake comes in 14 blends, so you can match a subtle natural look or a bolder feature floor. Choose your colour on this page before adding to cart.
How much flake do I need?
It depends on how dense you want the coverage. A light, partial broadcast uses less, while a full broadcast where no base coat shows through uses more, generally around half a kilo to one kilo per square metre for a full cover. Order a little extra so you do not run short mid floor.
How are the flakes applied?
Roll on your coloured base coat, then broadcast the flakes evenly into the wet coating until you reach the look you want. Once cured, scrape back any sharp edges and loose flake, then seal with a clear topcoat to lock everything in.
Do I need anything else to do a floor?
Yes. The flakes are the decorative layer only. You will also need a base coat and a clear topcoat, plus prep. For everything matched in one box, see our DIY flake floor Complete Kits.
Still unsure? Talk to a real installer — not a call centre.
Call (08) 9434 3302