High Gloss Concrete Sealer

Same-day dispatch
30-day returns
Expert phone support
Australian-owned

High Gloss Concrete Sealer

4.9 · 129+ Google reviews
$249.00

  • High-gloss sealer for concrete surfaces
  • Enhances colour and surface appearance
  • Resistant to water, oil, and wear
  • Suitable for pedestrian and vehicle traffic

In stock · ships today
or 4×$62.25 with

Australia-wide delivery in 3–5 business days

Same-day dispatch
30-day returns
Expert phone support
Australian-owned
Not sure which colour? Talk to a real installer · (08) 9434 3302
Description

SHIMICOAT High Gloss Concrete Sealer (HG300) is an acrylic emulsion concrete floor coating that cures to a hard, flexible, petrol resistant finish with a bright high gloss sheen. This Australian sealer protects and enhances new and old concrete, leaving a durable surface built for both pedestrian and vehicle traffic. It offers excellent resistance to water, alkalis and commercial grades of petroleum and hydraulic fluids, making it ideal for functional, decorative and protective concrete surfaces.

  • Hard yet flexible film with strong petrol and chemical resistance
  • Excellent resistance to water, alkalis, petroleum and hydraulic fluids
  • Tough, durable finish suited to foot and vehicle traffic
  • Strong bonding to concrete, brick, tile and many other surfaces
  • Brightens and protects tired or dull concrete
  • Available in High Gloss, Matt and Tinted finishes

Use it across a wide range of surfaces, including exposed aggregate, limestone, grey concrete, decorative concrete, tiles, all pavers, timber, and even metal and artworks. It suits driveways, paths, patios, garage floors and commercial concrete where a sealed, easy to clean surface is needed.

Choose from High Gloss, Matt or Tinted finishes, with tinted sealers available in most Australian Standard AS2700 colours (206 options) to match any colour scheme. Order your High Gloss Concrete Sealer today, or contact our team for help selecting the right finish.

Downloads & Guides
Technical data sheet (TDS) Installation guide Product brochure
Common questions

Frequently asked questions

The questions we get asked most about the High Gloss Concrete Sealer.

What is High Gloss Concrete Sealer used for?
It is a high gloss, solvent based concrete sealer that protects and finishes concrete, pavers and masonry. It guards against dust, water, stains and wear, and lifts the look of the surface.
How is it supplied?
High Gloss Concrete Sealer is supplied ready to use in a standard pack. Just stir it before applying.
How is it applied?
The surface must be clean, dry and free of dust and grease. Apply thin even coats by roller, brush or sprayer, usually two coats, allowing the recoat time on the data sheet between them. Thin coats give a better finish than one heavy coat.
How much will I need?
Coverage depends on how porous and textured the surface is. As a guide allow around 8 to 10 m² per litre per coat on smooth sealed concrete, and more on rough or bare surfaces. Measure your area and check the data sheet before ordering.
How long before I can use the area?
It is generally touch dry within a couple of hours and ready for light foot traffic the next day. Allow the full cure time on the data sheet before heavy traffic or wetting the surface.
Where can I use it?
It suits driveways, paths, patios, garage floors and other concrete and masonry surfaces. If you are sealing a specific surface and want to confirm it is suitable, contact us before you buy.

Still unsure? Talk to a real installer — not a call centre.

Call (08) 9434 3302