Commercial Tinted Epoxy

No flaking, no peeling No flaking, no peeling
Easy to apply Easy to apply
Money-back guarantee Money-back guarantee
20k+ projects protected 20k+ projects protected
4.9 · 129+ Google reviews

Commercial Tinted Epoxy

4.9 · 129+ Google reviews
$119.00

  • Commercial-grade epoxy for high-traffic areas
  • Medium cure formula for faster installation
  • Durable high-gloss protective finish
  • Ideal for kitchens, garages, and commercial spaces

Size 2.5 Ltr
Colour Bright Blue B23
No flaking, no peeling No flaking, no peeling
Easy to apply Easy to apply
Money-back guarantee Money-back guarantee
20k+ projects protected 20k+ projects protected
Description

SHIMICOAT Commercial Tinted Epoxy is a 100% solids, two component (Part A and Part B) epoxy floor coating, pre-tinted in your choice of colour and engineered for Australian commercial conditions. This medium cure, solvent free concrete floor coating delivers a tough, high gloss film that protects floors from stains, spills and heavy wear while allowing fast installation and a quick return to service.

  • 100% solids, solvent free and odourless for safer indoor application
  • Excellent chemical, abrasion and chalk resistance with strong adhesion to most substrates
  • Pre-tinted basecoat, primer or finish coat, tintable to Australian Standard Colours
  • High gloss, hard wearing surface that resists weathering, splashes and spills
  • Roller applied as a thin film, with film thickness adjustable using diluent
  • Compatible with non-slip aggregates and decorative flakes for a custom finish

Ideal for garage floors, workshops, warehouses, driveways, pathways, marine flooring and commercial kitchens, anywhere a durable, hygienic and easy to clean concrete coating is required.

Available in four sizes (2.5, 5, 15 and 25 litre) and a range of colours to suit your project. Choose your size and colour above to order, or contact our team for help matching the right system to your floor.

Downloads & Guides
Technical data sheet (TDS) Installation guide Product brochure Safety Data Sheet (SDS): request by email
Common questions

Frequently asked questions

The questions we get asked most about the Commercial Tinted Epoxy.

What is Commercial Tinted Epoxy used for?
It is a two part, solid colour epoxy coating for concrete floors and surfaces. It seals and colours the concrete in one hard wearing finish and suits garages, workshops, sheds and commercial floors that take traffic and wear.
What sizes and colours can I choose?
Commercial Tinted Epoxy is sold by volume in 2.5 Ltr, 5 Ltr, 15 Ltr and 25 Ltr. You can pick from 8 tinted colours. Choose your size and colour on this page before you add to cart, and the product is supplied as a matched two part epoxy.
How is it applied?
Prepare the concrete so it is clean, dry and sound, then mix the two parts (resin and hardener) at the ratio on the data sheet. Roll it on in even coats, usually two, working in manageable sections. Bare concrete should be primed or etched first for the best bond.
How much will I need?
Coverage depends on how porous your surface is and how many coats you apply. As a rough guide allow around 4 to 5 m² per litre per coat on prepared concrete. Rough or bare concrete draws in more, so measure your area and check the data sheet before ordering.
How long does it take to cure?
It is touch dry in a few hours and ready to recoat the next day. Allow about 24 hours before light foot traffic and around 7 days for full chemical and wear cure. Warmer weather speeds this up and cold weather slows it down.
Is this a full floor kit or just the coating?
This is the tinted epoxy coating on its own, not a complete floor kit. If you want everything for a finished floor in one box, including prep, colour and a clear topcoat, take a look at our DIY Complete Kits instead.

Still unsure? Talk to a real installer — not a call centre.

Call (08) 9434 3302