Clear Pump Polyaspartic

Same-day dispatch
30-day returns
Expert phone support
Australian-owned

Clear Pump Polyaspartic

4.9 · 129+ Google reviews
$99.00

  • Precision pump system for easy mixing
  • Crystal-clear UV-stable coating
  • Fast curing with high gloss finish
  • Ideal for art, crafts, and surface protection

Size 1Lt
In stock · ships today
or 4×$24.75 with

Australia-wide delivery in 3–5 business days

Same-day dispatch
30-day returns
Expert phone support
Australian-owned
Not sure which colour? Talk to a real installer · (08) 9434 3302
Description

SHIMICOAT Clear Pump Polyaspartic is a rapid curing, two component, solvent free aliphatic clear topcoat for concrete floors and other surfaces. This high gloss polyaspartic coating is UV stable and non-yellowing, sealing the surface against stains, spills and wear while delivering a tough, durable clear film. Each kit includes industrial heavy duty pumps (calibrated to dispense 8mL per stroke) for fast, accurate and mess free measuring of Part A and Part B, and the formula has been developed for Australian conditions.

  • Fast curing: returns to service in around 4 hours, far quicker than standard epoxy or polyurethane.
  • Simple 1:1 mix ratio (Part A to Part B) with enough pot life to apply by roller, brush or squeegee.
  • High UV stability and non-yellowing finish, ideal for outdoor and under sun areas.
  • Superior abrasion, chemical and corrosion resistance with roughly 98 percent solids and low VOC content.
  • Excellent adhesion to concrete, tiles, epoxy flake, steel, galvanised steel and aluminium.
  • Long shelf life of over 24 months once opened, as it does not react with atmospheric moisture.

Use Clear Pump Polyaspartic as a clear sealer and topcoat over driveways, pathways, workshops, warehouses and decorative flake or quartz floors, as well as automotive workshops, hangars and clean rooms. It can be left clear or tinted in all Australian Standard colours, and is suitable for water immersion applications.

Available in a range of sizes from 1 litre up to 40 litres to suit small touch ups through to large commercial floors. Choose your size above, or call our friendly team for advice on the right polyaspartic system for your project.

Downloads & Guides
Technical data sheet (TDS) Installation guide Product brochure
Common questions

Frequently asked questions

The questions we get asked most about the Clear Pump Polyaspartic.

What is Clear Pump Polyaspartic used for?
It is a UV stable, crystal clear polyaspartic topcoat supplied for easy measured dispensing using pumps. It adds a tough, glossy clear finish that protects the surface without changing its look, and it will not yellow in sunlight.
What sizes does it come in?
Clear Pump Polyaspartic is supplied as a matched two part set in 1Lt, 2 Lt, 4 Lt, 6 Lt, 8 Lt, 10 Lt, 20 Lt and 40 Lt. Choose the volume that suits your area or project before adding to cart.
How is it applied?
Mix Part A and Part B at the ratio on the data sheet, then roll on in thin even coats. Polyaspartic cures quickly, so work in sections and keep a wet edge. The surface beneath must be clean, dry and sound for a good bond.
Why choose clear polyaspartic over clear epoxy?
Unlike clear epoxy, polyaspartic is UV stable and will not amber under sunlight, so it is the better choice for outdoor surfaces and floors that get direct light. It also recoats and cures faster, which shortens the job.
How long does it take to cure?
It is touch dry within a couple of hours and you can usually recoat the same day. Light foot traffic is fine after about 24 hours and it reaches full chemical and wear resistance within a few days. Exact times depend on temperature, so check the data sheet.
Is this a complete kit?
This is the clear polyaspartic on its own, not a project kit. Add any grit, flakes or tools separately, or see our DIY Complete Kits for ready matched systems with everything included.

Still unsure? Talk to a real installer — not a call centre.

Call (08) 9434 3302