AQUAthane Clear Sealer

Same-day dispatch
30-day returns
Expert phone support
Australian-owned

AQUAthane Clear Sealer

4.9 · 129+ Google reviews
$139.00

  • Water-based polyurethane protective sealer
  • Excellent scratch and moisture resistance
  • Low odour and VOC free formula
  • Suitable for interior and exterior concrete

Size 5 Ltr
In stock · ships today
or 4×$34.75 with

Australia-wide delivery in 3–5 business days

Same-day dispatch
30-day returns
Expert phone support
Australian-owned
Not sure which colour? Talk to a real installer · (08) 9434 3302
Description

AQUAthane Clear Sealer is an ultra clear, water based, single component polyurethane concrete floor coating with a semi-gloss finish, made in Australia to protect and enhance concrete surfaces both indoors and outdoors. This advanced cross linking emulsion bonds strongly to well prepared concrete, and it can also be applied over existing solvent based acrylic coatings to freshen up a tired floor.

  • Ready to use water based polyurethane sealer with excellent adhesion to concrete
  • Tough and durable with strong scratch, mar and abrasion resistance
  • Excellent moisture barrier and water resistance for lasting protection
  • Odourless, low VOC and Green Star compliant for healthier indoor use
  • Non flammable and fast drying, a safer alternative to solvent based lacquers
  • Can be recoated over existing solvent based acrylic sealers

AQUAthane suits a wide range of internal and external concrete floors, including garage floors, cafe and restaurant floors, outdoor patios and pathways, and any concrete surface where hardness, durability and a clear protective finish are required.

Available in 5 litre, 10 litre and 20 litre sizes to suit small touch ups through to large floor areas. Contact our Australian team to choose the right pack size for your project.

Downloads & Guides
Technical data sheet (TDS) Installation guide Product brochure
Common questions

Frequently asked questions

The questions we get asked most about the AQUAthane Clear Sealer.

What is AQUAthane Clear Sealer used for?
It is a clear, water based polyurethane concrete sealer that protects and finishes concrete, pavers and masonry. It guards against dust, water, stains and wear, and lifts the look of the surface.
What sizes can I choose?
AQUAthane Clear Sealer comes in 5 Ltr, 10 Ltr and 20 Ltr. Select your size on this page before adding to cart.
How is it applied?
The surface must be clean, dry and free of dust and grease. Apply thin even coats by roller, brush or sprayer, usually two coats, allowing the recoat time on the data sheet between them. Thin coats give a better finish than one heavy coat.
How much will I need?
Coverage depends on how porous and textured the surface is. As a guide allow around 8 to 10 m² per litre per coat on smooth sealed concrete, and more on rough or bare surfaces. Measure your area and check the data sheet before ordering.
How long before I can use the area?
It is generally touch dry within a couple of hours and ready for light foot traffic the next day. Allow the full cure time on the data sheet before heavy traffic or wetting the surface.
Where can I use it?
It suits driveways, paths, patios, garage floors and other concrete and masonry surfaces. If you are sealing a specific surface and want to confirm it is suitable, contact us before you buy.

Still unsure? Talk to a real installer — not a call centre.

Call (08) 9434 3302