{"title":"Machinery","description":"\u003cp\u003eSurface preparation machinery for concrete floors. Grinding is the step that decides whether an epoxy or polyaspartic coating bonds for years or lifts in a season, so we stock the machines that do it properly: TAMAN floor grinders and edgers, and the HEPA dust extractors that keep the silica dust out of the air while you work.\u003c\/p\u003e\u003cp\u003eMachinery ships on pallet freight Australia wide. Call (08) 9434 3302 or email info@shimi.com.au to confirm stock and a delivery window before you book your job in.\u003c\/p\u003e","products":[{"product_id":"taman-c250-concrete-floor-grinder-edger-250mm","title":"TAMAN C250 Concrete Floor Grinder and Edger 250mm","description":"\u003cp\u003eThe TAMAN C250 is a single phase, direct drive concrete floor grinder built for the prep work that decides whether a coating lasts. It runs off a standard 10 amp power point, weighs 70 kg and grinds a 250 mm path, so one operator can profile a garage, workshop, patio or benchtop area without a generator or a three phase supply.\u003c\/p\u003e\n\u003cp\u003eIts best feature is the quick change shroud. Swap to the edging shroud and the head cuts to within 5 mm of the wall, which removes the ring of unground concrete that normally shows through around the perimeter of a finished floor.\u003c\/p\u003e\n\u003ch3\u003eWhy grinding matters before you coat\u003c\/h3\u003e\n\u003cp\u003eMechanical preparation is the single biggest reason an epoxy or polyaspartic floor sticks or peels. Grinding opens the slab to a CSP 1 to 2 profile, takes off laitance, old paint, glue and sealer, and gives the resin something to key into. On a power trowelled slab, acid etching will not get you there.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eQuick change shroud:\u003c\/b\u003e the grinding and edging shrouds swap over in seconds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrinds to 5 mm from the wall:\u003c\/b\u003e the edging shroud takes the head right up to walls, columns and door frames.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWet or dry:\u003c\/b\u003e a water connection is fitted for wet grinding, and a 50 mm dust port takes a HEPA extractor for dry work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRedi-Lock tooling:\u003c\/b\u003e a Redi-Lock converter plate is fitted, so segments change over by hand in under a minute.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdjustable handle:\u003c\/b\u003e sets from 165 to 60 degrees and folds flat for transport in a ute or van.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eQuality driveline:\u003c\/b\u003e Schneider switchgear and a Moreflex coupling between the motor and the head.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHeight control device:\u003c\/b\u003e adjusts the grinding head for wet work, dry work and edging.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eMotor\u003c\/th\u003e\n\u003ctd\u003e2.2 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003eSingle phase, 240 V, 10 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWorking width\u003c\/th\u003e\n\u003ctd\u003e250 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDrive\u003c\/th\u003e\n\u003ctd\u003eDirect drive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpeed\u003c\/th\u003e\n\u003ctd\u003e1034 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e70 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHead pressure\u003c\/th\u003e\n\u003ctd\u003e53 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDust port\u003c\/th\u003e\n\u003ctd\u003e50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTooling\u003c\/th\u003e\n\u003ctd\u003eRedi-Lock, or fixed plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eWet or dry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHandle\u003c\/th\u003e\n\u003ctd\u003eAdjustable, 60 to 165 degrees, folds for storage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003ePair it with\u003c\/h3\u003e\n\u003cp\u003eRun the C250 dry with the \u003ca href=\"\/products\/taman-tde2-ac-hepa-dust-extractor\" title=\"TAMAN TDE2-AC HEPA dust extractor\"\u003eTAMAN TDE2-AC HEPA dust extractor\u003c\/a\u003e to keep silica dust out of the air, and match the grit to your slab with \u003ca href=\"\/products\/redilock-diamond-plates\" title=\"RediLock Diamond Plates\"\u003eRediLock Diamond Plates\u003c\/a\u003e. Once the floor is profiled, the \u003ca href=\"\/collections\/diy-kits\" title=\"Shimicoat DIY floor coating kits\"\u003eShimicoat kit range\u003c\/a\u003e takes it from bare concrete to a finished floor.\u003c\/p\u003e\n\u003ch3\u003eDelivery and availability\u003c\/h3\u003e\n\u003cp\u003eMachinery ships on pallet freight direct from the supplier's warehouse, so it does not follow the same day dispatch that applies to our smaller items. Call (08) 9434 3302 or email info@shimi.com.au to confirm current stock and a delivery window before you book your job in.\u003c\/p\u003e","brand":"TAMAN","offers":[{"title":"Default Title","offer_id":45444942004247,"sku":"165-C250","price":2420.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1272\/3735\/files\/taman-c250-01-grinder.jpg?v=1787827293"},{"product_id":"taman-tde2-ac-hepa-dust-extractor","title":"TAMAN TDE2-AC Single Phase 2 Motor Auto Pulsing HEPA Dust Extractor","description":"\u003cp\u003eThe TAMAN TDE2-AC is a twin motor, single phase HEPA dust extractor built to keep up with a floor grinder all day. Two Ametek motors move 400 m³\/h through a two stage filter system, which is enough air for grinders up to 600 mm working width, including the \u003ca href=\"\/products\/taman-c250-concrete-floor-grinder-edger-250mm\" title=\"TAMAN C250 concrete floor grinder and edger\"\u003eTAMAN C250\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eWhat sets it apart is auto pulsing filter cleaning. The two cylindrical primary filters take turns being pulse cleaned while the machine keeps running, so there is no air compressor to drag around, no stopping every fifteen minutes to shake the filter out, and no slow fade in suction as the day goes on.\u003c\/p\u003e\n\u003ch3\u003eBuilt for concrete dust\u003c\/h3\u003e\n\u003cp\u003eGrinding concrete releases respirable crystalline silica, which is the reason dry grinding without extraction is no longer acceptable on a jobsite. The TDE2-AC runs a two stage system: 3.0 m² of primary filter media, then two H13 HEPA filters, each individually tested and certified to EN 1822-1 and IEST RP CC001.6 at better than 99.99% efficiency at 0.3 microns. Dust drops into a continuous drop down bag, so a full bag is tied off and binned without a second dust cloud.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eTwo Ametek motors:\u003c\/b\u003e sized for grinders with a working width below 600 mm, with individual switches so you can run one motor or both.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAuto pulsing cleaning:\u003c\/b\u003e patented Bersi system, no air compressor and no manual filter purging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwo stage filtration:\u003c\/b\u003e two cylindrical pre-filters, then two H13 HEPA final filters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCertified HEPA:\u003c\/b\u003e every H13 filter is individually tested to EN 1822-1 and IEST RP CC001.6.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eContinuous drop down bag:\u003c\/b\u003e clean, dust free disposal without opening the machine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFilter gauge:\u003c\/b\u003e vacuum meter on the body so you can see filter condition at a glance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSite ready:\u003c\/b\u003e large rear wheels and lockable front castors, single phase 240 V supply.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eTDE2-AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e2.4 kW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e240 V, 50\/60 Hz, single phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCurrent\u003c\/th\u003e\n\u003ctd\u003e9.6 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAirflow\u003c\/th\u003e\n\u003ctd\u003e400 m³\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eVacuum\u003c\/th\u003e\n\u003ctd\u003e240 mBar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePre-filter\u003c\/th\u003e\n\u003ctd\u003e3.0 m², better than 99.9% at 0.3 µm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHEPA filter (H13)\u003c\/th\u003e\n\u003ctd\u003e2.4 m², better than 99.99% at 0.3 µm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFilter cleaning\u003c\/th\u003e\n\u003ctd\u003eAuto pulsing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDust collection\u003c\/th\u003e\n\u003ctd\u003eContinuous drop down bag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e570 x 710 x 1300 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight (net \/ gross)\u003c\/th\u003e\n\u003ctd\u003e68 kg \/ 80 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuits grinders up to\u003c\/th\u003e\n\u003ctd\u003e600 mm working width\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSupplied with\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eD50 double layer EVA hose\u003c\/li\u003e\n\u003cli\u003eD50 floor brush\u003c\/li\u003e\n\u003cli\u003eD50 S wand\u003c\/li\u003e\n\u003cli\u003eD50 hose cuff\u003c\/li\u003e\n\u003cli\u003eD70 to D50 reducer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePair it with\u003c\/h3\u003e\n\u003cp\u003eThe TDE2-AC is matched to the \u003ca href=\"\/products\/taman-c250-concrete-floor-grinder-edger-250mm\" title=\"TAMAN C250 concrete floor grinder and edger\"\u003eTAMAN C250 grinder\u003c\/a\u003e and to hand grinding with \u003ca href=\"\/products\/cup-grinding-wheels\" title=\"Cup Grinding Wheels\"\u003ecup grinding wheels\u003c\/a\u003e. Browse the rest of the \u003ca href=\"\/collections\/grinding-equipment\" title=\"Shimicoat tools and equipment\"\u003eShimicoat tools and equipment\u003c\/a\u003e range for the prep and application gear that goes with it.\u003c\/p\u003e\n\u003ch3\u003eDelivery and availability\u003c\/h3\u003e\n\u003cp\u003eMachinery ships on pallet freight direct from the supplier's warehouse, so it does not follow the same day dispatch that applies to our smaller items. Call (08) 9434 3302 or email info@shimi.com.au to confirm current stock and a delivery window before you book your job in.\u003c\/p\u003e","brand":"TAMAN","offers":[{"title":"Default Title","offer_id":45444942037015,"sku":"149-TDE2-AC","price":4235.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0794\/1272\/3735\/files\/taman-tde2-ac-01.jpg?v=1787827305"}],"url":"https:\/\/shimi.com.au\/collections\/machinery.oembed","provider":"Shimicoat","version":"1.0","type":"link"}